Honda Motorcycles & Honda Dirtbikes Information

2006 Honda VTX1800S Pictures & Specs


2006 Honda VTX1800S

Honda VTX1800S Specifications

Honda VTX1800S MSRP: $12,599

Honda VTX1800S Engine:
Engine Type 1795cc liquid-cooled 52-degree V-twin
Bore and Stroke 101.0mm x 112.0mm
Compression Ratio 9.0:1
Valve Train SOHC; three valves per cylinder
Carburetion Programmed Fuel Injection (PGM-FI) with automatic choke
Ignition Digital, two spark plugs per cylinder

Honda VTX1800S Drive Train:
Transmission Five-speed
Final Drive Shaft

Honda VTX1800S Chassis / Suspension / Brakes:
Front Suspension 45mm inverted fork; 5.1-inch travel
Rear Suspension Dual shocks with five-position spring-preload adjustability; 3.9-inch travel
Front Brakes Dual 296mm discs with LBS three-piston calipers
Rear Brake Single 316mm disc with LBS twin-piston caliper
Front Tire 150/80R-17 radial
Rear Tire 180/70R-15 radial

Honda VTX1800S Dimensions:
Rake 32.0 degrees
Trail 163.0mm (6.0 inches)
Wheelbase 67.5 inches
Seat Height 27.4 inches
Dry Weight 750.0 pounds
Fuel Capacity 5.3 gallons

Honda VTX1800S Other:
Emissions Meets current CARB and EPA standards.
Available Colors Metallic Silver, Candy Orange/Black, Gold/Black
Model ID VTX1800S1
1 year Transferable, unlimited-mileage limited warranty; extended coverage available with a Honda Protection Plan.

No comments currently exist for this post.
Leave a Reply:




Honda Motorcycle Categories Latest Previews
  • No posts found
Latest Comments Latest Reviews
  • No posts found
Honda Motorcycle Tags RSS Honda Motorcycle Forums
  • HISS 929 RRY March 13, 2010
    Can anyone help me please I am looking for any wiring information related to HISS on 929rry. I have just bought the bike and was told it had an ecu fault all I really want is the engine. I would really like to hear it running before before swapping it. Only managed a brief look this evening, but when the ignition is turned on the HISS light does not illumina […]
  • Frame sliders and crash bars March 13, 2010
    Hi, I'm new here and I am planning to buy a 2008 CBR600RR in the next week. I was wondering what frame sliders are the best for protecting the engine and plastic on this bike. I don't care if it sticks out I just want to protect the bike. Are crash bars nessisary?:patriot: […]
  • slowing down steering on a 919 March 13, 2010
    Just joined, got a question to post. This year I purchased a new (holdover) 2007 900F Honda. Still have my 1986 Fj1200 Yamaha that I have been riding for 20+ years. The 919 feels like a bicycle with an engine ( a very large engine). Would replacing the front tire with a 130/70-17 ( stock is 120/70-17) slow down the steering inputs, giving the 919 a different […]
  • f1 light flashes 8 times. March 13, 2010
    my light is showing that my tp sensor, or wiring is causing a problem. my bike works fine except it acts up a little at first bit of throttle. what should i check for or service? […]
  • Steering angle limiting? March 13, 2010
    Hello, Looking for a solution to limit the steereing angle, possibly without welding any bungs or smth. Somewhere swa a 2 pieces thick rubber covers, attached on fork legs where they meets the frame. They were secured simply, by 2 zip ties. Anyone could point, where to look for those? […]